Advance Router is a whole new category launched by JAK Machinery. It is basically a combination of the two machines – Flat Bed Router and 4 Axis Turning Carving Lathe machine.
This Machine work in 2 type of mode.
1. Router mode – Simple 3 Axis Router – Operation from the top side on sheet material 2. Lath Mode – Turning and 4 Axis Carving on Wooden pillar or wooden leg
CNC Wood Turning mode, High Speed Production of Cylindrical Wooden Products
Simultaneous 4 Axis Rotary Carving on Solid Wood
CNC Flat Bed Panel works on MDF, Plywood, PVC, ACP, Corien etc
| Operations | 4 Axis Rotary Turning + Carving, Flat Bed CNC Router |
| Bed Size | 4x8 Feet (customizable) |
| Max Material Thickness | 3 inch (customizable) |
| Carving Spindle Type | MTC / ATC (Manual / Automatic Tool Change) |
| Spindle Specification | 4.5/6/9 kW Air Cooled, 18000 rpm, ER32 |
| Bed Type | T-Slot Aluminum / Vacuum Bed / Hybrid |
| Axis Motion Motor | Servo Motor |
| Max Rapid Speed | 14000 mm/min |
| Position Accuracy | 0.05 mm (50 Micron) |
| Number of Axis | 4 Axis |
| Controller | NK105 / Mach3 LAN |
isolating the control drives from the power source
Showing the Machine position if running, Stops or Emergency State
Navigate the Oil from Pump to Rail Bearings in one minute
Connected Heavy duty Fabricated Base Structure
PnF Make High Quality Sensors
High Quality Flxible Cable for 10 million Cycles
Our over important Plates passed with VMC Milling and Drilling
High precision Gearbox for high rigidity on fast movement
Automatic On off Dust hood during the operation
10 second for loading and 10 second for unloading
Fast Movement of Z Axis
Heavy duty Headstock for heavy Wood Lathe Works
Separate User interface for Router and lath mode for better user experience
Automatic Choose the origin based on Operating mode - Save time
T1 to Carving and T2 for Turning , changing automatic
2 Different Spindle for quick Tool Change, Tool Change time 5 Second
Linear Tool Magazine for Pick and place 6 different tools. Tool Change time 15 Seconds
Hybrid table with Vacuum and T Slot. This helps for faster clamp and declamp using vacuum pump.
Roller Press useful for Bent Panel board, Specially need for grooving or Half Cut.
Add Tenon Table for Wood joinery. We use Parameterized Technology for tenon manufacturing.
Automatic Load and Unloading for mass production
Managed by: littlebig.in
